APC BR700G Back-UPS Pro 700 UPS BR700G

UPS : Tower : SKU: BR700G

Manufacturer: APC

Part Number: BR700G

UPC: 731304266792

Thinking of making a large purchase?

APC BR700G Back-UPS Pro 700 UPS

$154.99

*FREE SHIPPING*

Free shipping to 48 states

IN STOCK!

Estimated Delivery with free shipping by:

Friday April 26th*

* If ordered today with free shipping.

Features

Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment

While batteries are being replaced

Lifetime data recovery warranty Provides peace of mind by providing professional data recovery

Services in the event data is lost due to the failure of the unit

Battery and surge protected outlets - Back up & protect your hardware and data during power outages

Surges and spikes

Provides protection of connected equipment from power surges on the data lines

Protect secondary electronics from surges and spikes

Without reducing battery power used to run primary electronics during an outage

Energy saving feature automatically power off peripherals when the a master device, usually a PC,

Hibernates or is shut down. Power to peripherals is immediately restored when the master device

Wakes up or is switched on

Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability

By correcting low and high voltage conditions w/out using the battery (not available on all models)

Patent-pending operating mode that bypasses unused electrical components in good power conditions

To achieve very high operating efficiency without sacrificing any protection

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery

To maximize useful battery life and protect sensitive electronics

Toggle between pre-determined voltage-transfer points depending on your power quality

(high, medium or low sensitivity),maximizing useful battery life & protecting sensitive electronics

Maximizes battery performance, life, and reliability through intelligent, precision charging

Cold-start capable - Provides temporary battery power when the utility power is out

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Periodic battery self-test ensures early detection of a battery that needs to be replaced

Protect equipment with input transformer blocks without blocking access to other receptacles

Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse

Increases UPS availability by allowing quick, easy battery replacement

Use your PC to access additional power protection & management features for your UPS via a USB Port

LCD Status Display - Provides key UPS status at a glance. Multiple status indicators

With load and battery bar graphs

Audible alarms Provides notification of changing utility power and UPS power conditions

Disconnected battery notification - Warns when a battery is not available to provide backup power

Ensures the product has been tested and approved to work safely

With the connected service provider equipment and within the specified environment

APC Back-UPS Pro,420 Watts /700 VA,Input 120V /Output 120V, Interface Port USB

Editor's Note

Compact backup unit, provides emergency backup power for your equipment. Batteries are hot swappable with disconnect notice. This is a great solution for a small office or home.

Specification

Audible noise at 1 meter from surface of unit	45.00 dBA
Color	Black
Cord Length	1.83 meters
Data Line Protection	Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector),
Data Line Protection	Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)
Filtering	Full time multi-pole noise filtering :5% of IEEE surge let-through
Filtering	zero clamping response time: instantaneous
Included Battery Modules	1
Input Breaker Capacity	15 A
Input Frequency	50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations	93 - 130V
Interface Port(s)	USB
Master Carton Dimensions (Length x Width x Height)	452 mm
Master Carton Units	2.00
Master Carton Weight	16.53 KG
Max Configurable Power	420 Watts / 700 VA
Maximum Depth	310.00 mm
Maximum Height	190.00 mm
Maximum Input Current	12A
Maximum Width	91.00 mm
Net Weight	7.15 KG
Nominal Input Voltage	120V
Nominal Output Voltage	120V
Operating Elevation	0-3000 meters
Operating Environment	0 - 40 °C
Operating Relative Humidity	0 - 95%
Output Connections	(3) NEMA 5-15R (Battery Backup)
Output Connections	(3) NEMA 5-15R (Surge Protection)
Output Frequency (sync to mains)	50/60Hz +/- 3 Hz
Output Power Capacity	420 Watts / 700 VA
RBC Quantity	1
REACH	REACH: Contains No SVHCs
Regulatory Approvals	ENERGY STAR (USA), FCC Part 15 Class B, NOM, TUV, UL 1778
Replacement Battery	RBC17
RoHS	Compliant
SCC Codes	1073130426679 9
Shipping Depth	442.00 mm
Shipping Height	252.00 mm
Shipping Weight	8.00 KG
Shipping Width	138.00 mm
Standard Warranty	3 years repair or replace
Storage Elevation	0-15000 meters
Storage Relative Humidity	0 - 95%
Storage Temperature	-15 - 45 °C
Surge energy rating	354 Joules
Topology	Line Interactive
Typical recharge time	12 hour(s)
Units per Pallet	48.00
Waveform Type	Stepped approximation to a sinewave

In The Box

(1) APC Power-Saving Back-UPS Pro 700

USB cable, User Manual

FREE SHIPPING ON OUR ENTIRE CATALOG!