Startech IDE2SAT2

Cables : IDE : SKU: IDE2SAT2

Thinking of making a large purchase?

Startech 40-Pin IDE PATA to SATA or Optical Drive Adapter

$21.77

*FREE SHIPPING*

Free shipping to 48 states

Estimated Delivery with free shipping by:

* If ordered today with free shipping.

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard

Connect a SATA device to an IDE/ATA motherboard or controller card

Complete hardware solution; no software required

Support for 48-bit Logical Block Addressing (LBA)

Compliant with SATA revision 1.0 specification

Compatible with Ultra ATA 133 specification

Supports 2.5", 3.5", and 5.25" SATA Drives

ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives

Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface

Ideal for use with older motherboards that do not support SATA

Enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port

Effective solution that allows you to add newer SATA drives, and keep your existing motherboard

Solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard

Also features ODD (Optical Disk Drive) support

Allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard

Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host

Hassle-free installation, with no software CD required

2 year warranty and free lifetime technical support

Chipset ID	Marvell - 88SA8852
Connector Type(A)	1 - IDE (40 Pin; EIDE/PATA)
Connector Type(B)	1 - SATA Data & Power Combo (7+15 pin)
Connector Type(C)	1 - SP4 (4 pin; Small Drive Power)
Humidity	15~90% RH
Maximum Data Transfer Rate	133MB/sec
Operating Temperature	5°C to 50°C (40°F to 122°F)
Product Height	0.9 in [23 mm]
Product Length	3 in [75.5 mm]
Product Weight	0.5 oz [15 g]
Product Width	0.8 in [20 mm]
Shipping (Package) Weight	2.8 oz [80 g]
Storage Temperature	-25°C to 80°C (-13°F to 176°F)
System and Cable Requirements	An IDE controller and ATA cable (not included).
Warranty	2 Years

1 - IDE to SATA adapter

1 - LP4 Molex to SP4 Power Cable

1 - Instruction Manual