Network : Switches : 8-Port : SKU: J9780A#ABA

J9780A#ABA

Manufacturer: HP

Part Number: J9780A#ABA

UPC: 886112459345

Thinking of making a large purchase?

HP HP 2530-8-PoE+ Switch
$504.36

*FREE SHIPPING*

Free shipping to 48 states


IN STOCK!

Estimated Delivery with free shipping by:

Friday August 19th*

* If ordered today with free shipping.

Features

  • The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches
  • Deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks
  • Designed for entry-level to midsize enterprise networks
  • These Gigabit and Fast Ethernet switches deliver full Layer 2 capabilities with optional PoE+
  • Enhanced access security, traffic prioritization, and IPv6 host support
  • Offers uplink flexibility with four Gigabit Ethernet uplinks on all 24- and 48-port models
  • Traffic prioritization (IEEE 802.1p): allows real-time traffic classification
  • With support for eight priority levels mapped to either two or four queues
  • Uses weighted deficit round robin (WDRR) or strict priority (SP)
  • Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port @ priority level
  • VLAN-based: prioritizes traffic by specifying a VLAN and priority level
  • Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic
  • Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
  • Choice of management interfaces: Web graphical user interface (GUI):
  • HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser
  • Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI
  • (SNMPv1/v2c/v3): allows a switch to be managed w/ a variety of third-party network management apps.
  • Virtual stacking: provides single IP address management for up to 16 switches
  • sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI
  • (LLDP): automates device discovery protocol for easy mapping by network management applications
  • Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog
  • Provides log throttling and log filtering to reduce the number of log events generated
  • IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network
  • Dual stack (IPv4/IPv6): supports connectivity for both protocols
  • Provides a transition mechanism from IPv4 to IPv6. MLD snooping
  • Forwards IPv6 multicast traffic to the appropriate interface
  • Prevents IPv6 multicast traffic from flooding the network
  • (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
  • Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices
  • Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
  • Pre-standard PoE support: detects and provides power to pre-standard PoE devices
  • VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
  • Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data
  • 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames
  • 16K MAC address table: provides access to many Layer 2 devices
  • GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
  • Per-VLAN Spanning Tree Plus (PVST+): allows each VLAN to build a separate spanning tree
  • Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs
  • (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
  • RADIUS/TACACS+: eases switch management security administration by using a password authentication
  • Source-port filtering: allows only specified ports to communicate with each other
  • (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI
  • Port security: allows access only to specified MAC addresses
  • Which can be learned or specified by the administrator
  • Lifetime warranty, advance replacement, next business day, phone support, software releases

  • Specification

    Differentiator The HP 2530-8-PoE+ Switch is a fully managed layer 2 switch with 8 10/100 PoE+ ports
    Differentiator 2 dual personality ports
    Dimensions (W x D x H) 10 x 6.28 x 1.75 in (25.4 x 15.95 x 4.45 cm)
    Heat dissipation 29 BTU/hr (30.6 kJ/hr)
    Input voltage 100 - 127 / 200 - 240 VAC
    Latency 100 Mb Latency: < 1.3 µs / 1000 Mb Latency: < 2.3 µs
    Management features IMC - Intelligent Management Center / command-line interface / Web browser
    Management features configuration menu / out-of-band management (serial RS-232C or Micro USB)
    Management features IEEE 802.3 Ethernet MIB / Repeater MIB / Ethernet Interface MIB
    Memory and processor ARM9E @ 800 MHz; 128 MB flash; packet buffer size: 1.5 MB dynamically allocated; 256 MB DDR3 DIMM
    Operating humidity range 15 to 95% @ 104°F (40°C) (noncondensing)
    Operating temperature range 32 to 113°F / (0 to 45°C )
    PoE capability 67 W
    Ports 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX
    Ports IEEE 802.3at PoE+);Media Type: Auto-MDIX;Duplex: half or full
    Ports 2 dual-personality ports;each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3
    Ports Type 10Base-T / IEEE 802.3u Type 100Base-Tx
    Ports IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports
    Ports 1 dual-personality (RJ-45 or USB micro-B) serial console port
    Power consumption 76.7 W (maximum)
    Switching capacity 5.6 Gb/s
    Throughput 4.1 million pps
    Warranty Lifetime, advance replacement, next business day, phone support, software releases
    Weight 2.0 lb (0.91 kg)

    In The Box

  • (1) HP 2530-8-PoE+ Switch